Consumer questions are answered here. Visit the best garage door FAQs on the net.
According to our experts stationed in Rye, you will need 6 specific tools to install your very own garage door. These tools are: locking pliers, a hammer, screwdrivers, a tape measure, a level and a socket wrench kit.
Yes, it means that there is something wrong with your circuit board. You should consider replacing the circuit boards, which is quite easy, despite how difficult it might sound. You just need ¼-inch nut driver and around 10 minutes. Take out the light cover, then the light bulb, disconnect the switch and safety sensor wires, take out some screws and that’s it.
Liftmaster produces remote controls with rolling codes, which means that the code is not fixed at a particular frequency but it changes every time you click. The series of these remotes is called security plus 1 & 2 and they're definitely suggested for higher safety.
Servicing a garage door is less about tricks and more about effort. If you take the time to look into each and every part and make sure that they’re well maintained, you’ll have no problems. Rye garage door experts also recommend that you clean the garage door itself.
Most garage door related injuries are sourced from the springs, which are subjected to very high tension. To keep your family safe, it's best to have a safety cable installed in the garage door track. A safety cable kit is also available for easy use.